BETAFPV HX100 2-3S FPV Racing Quadcopter Carbon Fiber (TBS Crossfire)

Description

Product Description

BETAFPV – A market leading innovative company, is focused on the Micro FPV racing drone. HX100, a 100mm small-size Toothpick carbon fiber drone. The first carbon fiber FPV racing drone of BETAFPV, which is small but contains much power, enable you to enjoy the indoor fun and explore the outdoor excitement.

• F4 2-4S AIO FC- Comes with F4 2-4S AIO 12A FC, possesses high performance STM32F411CEU processor and tuned Betaflight MATEKF411 (MK41), safer and more reliable. Definitely can give HX100 2-3S FPV quadcopter more POWER
• EOS V2 Camera&A01 VTX=Upgrade the camera from Runcam Nano V2 to Caddx EOS V2 with the A01 VTX, which output power is switchable includes 0mW, 25mW and 200mW, brings you a higher quality video and low RF interference
• 1103 8000KV Motor-Customized lightweight 1103 8000KV motors with strenthened cable connectors. It is more thicker which will not easy to break off. Whole drone no soldering or tinkering necessary, just plug and play
• 100mm Toothpick carbon fiber drone-HX100 only weight 43.7g, made of Toothpick 3K Carbon Fiber frame, which is the most popular choice for FPV Racing. It can fly smoothly and powerful enough, it feels like a powerful little elf, will gives you more fun
• 2 set props, More enjoyment-Includes 48mm 4-blade propeller for 3S battery and 65mm 2-blade propeller for 2S battery. To explore the more fun of HX100 with different options. BETAFPV 300mAh 3S and 300mAh 2S high rate battery are recommended by default.

BETAFPV – A market leading innovative company, is focused on the Micro FPV racing drone.

HX100, a 100mm small-size Toothpick carbon fiber drone. The first carbon fiber FPV racing drone of BETAFPV, which is small but contains much power, enable you to enjoy the indoor fun and explore the outdoor excitement.

F4 2-4S AIO 12A FC

• This F4 2-4S AIO FC has a built-in current sensor, you could get a more accurate current value without the virtual current meter.
• Light weight and easy install, this F4 2-4S AIO FC (BLHeli_S) is suitable for brushless whoop like 2S Pro 2 Series and 3S X Series.
• It has weight of 5.6g integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC which can support 4S battery for fast flying experience.
• The F4 2-4S AIO FC Brushless Flight Controller builted without receiver, supports Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2. Compatible receivers signal include PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

• CPU: STM32F411CEU6 (100MHZ )/ Six-Axis: MPU6000 (SPI connection)
• Firmware version: Betaflight MATEKF411 (MK41)
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Size: 26mm x 26mm, whoop mounting pattern / Built-in current sensor
• Support BLheli/BLHELI_S suite Pass-through ready / Firmware: BLHELI_S
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600I
• Input voltage: 2S-4S / Continue current: 12A
• Processor: SILABS EFM8BB21F16G / Factory firmware: G-H-30-16.7

Runcam Nano V2 Cam&A01 VTX

Equipped with customized Runcam Nano V2 with the A01 VTX, which is a 1/3″ 700TVL CMOS FPV camera, a perfect match with HX100. Be able to transfer the instant image and provide high quality video.which output power is switchable includes 0mW, 25mW and 200mW, brings you a higher quality video and low RF interference